Sunday, April 24, 2011

Doggie-Gate

Gated Wrigley, wondering what he did wrong

Wrigley loves to play with us. In fact, he thinks he is actually one of us—that is to say, human. He follows us wherever we go and tries his best to be part of the gang. Since spring weather has finally arrived in Kansas City, most meals are shared on the porch with the family.

Wrigley loves the porch, but he also loves the rest of the neighborhood as well. Unfortunately, our neighbors are not so keen on dogs running around the street and through their yards. So, when we "porch-it," we wall in the beast with extra patio chairs, ghetto-fabulous style.

With two solid handrails bordering the stairs, I had an "ah ha" moment this morning, and decided to see if a custom cedar gate would work. With u-shaped ends, I can slide in this simple gate and keep Wrigley at bay in style.

Newly gated Wrigley, grinning with a hambone

Saturday, April 23, 2011

Cutting Board #2 - Mixed Woods

End grain cutting board with mixed hardwoods

 My friend had a pile of milled hardwoods mixed in a bucket last week. I asked if could take some of them home to make another cutting board. I know there is some red oak and maple, but I'm not sure what else is in the mix.

Top view of board

The results are wild and irregular in a honey tone. I also tried staggering this board, instead of a true checkerboard look like last time. Projects like this are good for beginners (like myself) who are trying to get better at using a table and miter saw.

At this point, it is still fun to make the boards. However, the final step (sanding) takes way too long without a planer. I think this will be the last cutting board I make until I have one. If I do get a planer, I am open to taking more orders on boards.

Red oak end-grain border

The Least Fun Project Ever

New insulation, R-25 rating, installed in attic

When we had our home inspected in 2008, the inspection guy suggested we add some more insulation in the attic. There was about 6 inches of that old newspaper/cellulose stuff.

"Well, that sounds good," I agreed.

Two years later, we still had not added insulation. Probably because it is just expensive enough, and just plain itchy/hot/uncomfortable in an attic. Well, thanks to a friend with some extra insulation, we finally bit the bullet and dropped about 30 rolls of insulation into the attic.

The results are, well, dull itchy and yellow as of now. Hopefully the new attic "scarf" save us some money in the hot and cold seasons.


Sunday, April 17, 2011

Yard Work: Neighborhood Edition

In the midst of remodeling our house for almost two years, we have found ourselves connecting with our neighbors and neighborhood. Yesterday, I met up with some friends from Troostwood Neighborhood, and we cleaned up their park.

Since I can make videos, I offered to film the event so that they can promote their local efforts.

Monday, April 11, 2011

Greener Grass

Wrigley snuggling with the happy grass

I thought it would never happen. A lush green lawn  — and not the "I-just-bought-some-sod-and-rolled-it-out" kind, but an actual thick green turf that grew on its own, well kinda. And Wrigley agrees that it feels good underpaw.

The secret? Well, I guess you could say drugs ... and some dedication.

My grass is all hopped up on seed, fertilizer and weed control. Its a slow process that takes some serious faith in the green grass system. Let me be the first to tell you that if you stick with it for a couple seasons, you will begin to see results that are very satisfying. But it does take time.

What I learned in the process:
1. Fescue is the best for my sunny yard, and not bluegrass.
2. Leaves left in grass will suffocate your grass over the winter.
3. If you are in a drought, its pretty hard to keep grass alive without a sprinkler system.
4. Clover won't die without weed killer.
5. Mow your lawn at its highest setting to let the good grass control the yard and block weeds from getting sun (this one is really important and took me two seasons to actually believe).
6. Spring is for preventing weeds, fall is for seeding and preparing the lawn for the next year.
7. A lawn aerator is a big scary machine that pokes holes in the earth and can pull you anywhere.

Wrigley approves.

Finally, grass I can walk on barefoot

Saturday, April 9, 2011

Is Less More?

AFTER: Leftover butcher block wood turned into a pen holster

Two points for writing a design catchphrase.

In my experience, sometimes less is more — sometimes more is more. Just depends on what you need and are going for. This is a test on whether or not we need 100 pens at any given moment on our desk, or just eight. I think we should know soon enough if this was a good idea.

I suppose I could have put fancy matching Ticonderoga pencils into the piece for a prettier picture, but the pen/pencil mix is probably more realistic.

BEFORE: Previous pen solution for my desk


Thursday, April 7, 2011

How To: Homemade Cutting Boards - Part 2

Completed 12" x12" end grain cutting board

Orion and I met up for a second night on the cutting board project.

I can now tell you that 50% of the work on cutting boards is sanding. The rest is gluing, and waiting, and waiting and waiting.

We managed to get three cutting boards out of eight 1.5" X .75" X 6' strips of walnut and red oak. One board is completely sanded and ready for use in our kitchen, the other two are getting smoothed out in the coming days.

We used a random orbit sander to smooth out all the surfaces. 80 grit was not rough enough, so we went to 60 grit for quicker results on the super hard surface. In a perfect world, this would be a job for a planer, but since we don't have one, the hand sander will do. After 60 grit feels smooth, we did 150 grit and 220 grit for a perfectly smooth finish.

After sanding, added something called "feed n' wax" on the wood, which is a combo of beeswax and oils to make the wood visually richer.

The results are satisfying — and we've learned a new trick that will be perfect for making family gifts next Christmas...


Patience is the secret

Orion glued up the biggest cutting board last night

Cutting board smooth as marble after 220 grit sanding

The waxy oil looks like snot

This wood was thirsty for sure – now it's in HD
Rubber grips on the bottom allow for some grip and leave room for moisture to escape


twitter test